MC112 is a catalytic gas sensor which is used for gas concentration detection in industrial field such as natural gas, LPG, coal gas, alkane.
MC113 is a catalytic combustion which is used for detecting combustible gas as LPG, LNG, coal gas.
HTU21P(F) is a new humidity and temperature sensor which is with PWM interface, analog output.
HTU21A(F) is a new digital humidity sensor with temperature output. It provides calibrated, linearized signals in digital, I²C format.
XB32 XB OEM-Series is the latest development in transmitters for humidity, temperature and dew point.
The new HygroFlex3-series is the latest development in HVAC transmitters for relative humidity, temperature and dew point.
MC119 is a catalytic gas sensor which can be used to combustible gas leaking alarm or detectors and gas concentration detection in industrial field
ME2-O2 low consumption, mini size, high sensitivity, wide range of linearity, and better anti-jamming capacity, good reproducibility,stability and reliability
ME3-O2 ,low consumption, high sensitivity, wide range of linearity, and better anti-jamming capacity, good reproducibility,stability and reliability.
1200 series is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dual-in-line configuration.
MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration.
MS5534C 10 to 1100 mbar Absolute Pressure Sensor 9 x 9 mm, 16 Bit ADC, Supply voltage 2.2 V to 3.6 V, -40°C to +125°C operation temperature.
MS5805-02BA01 is a new generation of high-resolution altimeter sensors with I2C bus interface. 10 to 2000 mbar.
MS5541-30C Integrated Miniature 30 Bar Absolute Pressure Sensor Module, 0 - 30 bar absolute pressure range, Supply voltage 2.2V to 3.6V.
MS5535-30C Pressure Sensor Module, 0-30 bar absolute range, 16 Bit ADC resolution pressure measurement and control systems.
ME2B-CO Electrochemical CO sensor, 0~1000ppm, low Low consumption, High precision, High sensitivity, Extensive linear range
MH-741A NDIR CH4 sensor, 0~100% VOL, Fast response and resume, Temperature compensation and excellent linear output, Excellent stability
The MS4515DO is a small, ceramic based, PCB mounted pressure transducer from Measurement Specialties.
FRI is a fiber optic refractive index sensor, ideal for refractive index measurement of fluids in chemical and food processing industry applications.
FTI-10 conditioner is designed to perform accurate single-channel measurements.
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications.Flow Range from 0-200 sccm up to 0-1000 sccm.
FOD is a fiber optic linear position and displacement sensor that provides high accuracy, absolute measurements of position and displacement.
FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration.
The FS8000 requires a power supply of 8~24 Vdc, and provides an analog output of 0.5~4.5 Vdc corresponding to the flow rate from 0 to full scale.
FS4003 has a flow channel diameter of 3 mm. This sensors have a very low pressure loss while it can measure air flow up to 5 SLPM.
FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments.
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology.
HTU21DF sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
HTU20D is a new digital humidity sensor with temperature output of MEAS. This sensor provides calibrated, linearized signals in digital, I²C format.
FOT-HERO is a fiber optic temperature sensor specifically designed for use in Electronic Explosive Device (EED) and HERO-type testing applications.
TG-51 is a gage pressure sensor for oilfield downhole, 0~160MPa, -40℃~+80℃, high stability, wear resistance, impact resistance and anti-corrosion
TG-52 is a high temperature oilfield download pressure transducer , low temperature error, high accuracy, high stability and cost-effective
TA-51 is a absolute pressure sensor for oilfield downhole, 0~160MPa, -40℃~+80℃, high stability, wear resistance, impact resistance and anti-corrosion
MG-70 is a gage pressure microelectronic Transducers, 0~160MPa, -40℃~+120℃, high accuracy, high stability, wear resistance, impact resistance and anti-corrosion
MG-71 is a gage pressure microelectronic sensor, 0~160MPa, -40℃~+120℃, high accuracy, high stability, wear resistance, impact resistance and
MA-70 is a absolute pressure microelectronic transducers 0~10MPa, -40℃~+120℃, high stability, wear resistance, impact resistance and anti-corrosion
MIDA-SG-12-12-H is a High-temperature Gage Pressure Transmitters, wide pressure range, high stability, wear resistance, impact resistance and anti-corrosion
CK 200 kg to 2500 kg Low Profile Compression Load Cell,
17-4 PH Stainless Steel,
Combined Error ≤ ±0.5%,
Protection Class IP67.
SG-12-081-C is a high-temperature gage pressure transmitters 0-40MPa, high stability, wear resistance, impact resistance and anti-corrosion
SG-12-082-C is a high-temperature gage pressure transmitters 0-60MPa, high stability, wear resistance, impact resistance and anti-corrosion
SG-12-06-C is a high-temperature gage pressure transmitters 0-1.6MPa, high stability, wear resistance, impact resistance and anti-corrosion
SG-12-11-H is a high-temperature pressure transmitter, 0-160MPa, high stability, wear resistance, impact resistance and anti-corrosion
SG-13 is a Gage Pressure Transmitters, 0~160MPa, Operating temperature range -40~80℃,
TS318-1B0814 used for contactless temperature measurement in many applications; transfer the heat radiation emitted from the objects into a voltage output.
The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users.
TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation.
The HC2-series are digital humidity-temperature probes based on the AirChip 3000 technology.
The STT-S style platinum resistance temperature sensors are suitable for the equipment surface and internal temperature measurement.
FOP-C is a fiber optic pressure sensor designed for general industrial applications in harsh and hazardous environments, where very high pressure conditions.
The FOT-L-SD and FOT-L-BA are fiber optic temperature sensors perfectly suited for harsh environmental conditions.
FOP-MH is a fiber optic pressure sensor designed mainly for applications where extreme temperature conditions can be found such as aerospace and defense.
FOP-M is a fiber-optic pressure sensor designed mainly for applications where high temperature conditions can be found such as in aerospace and defense.
FOP-MIV has been especially designed and tested to fulfill the highest of medical performance requirements.
FOP-M260 Fiber Medical Pressure Sensor is used in several FDA and CE approved devices in a variety of clinical applications.
UMI conditioner is designed to perform accurate multi-channel temperature, pressure, strain, refractive index, and displacement measurements.
SprintIR NDIR CO2 Sensor is a high speed (20 Hz) CO2 sensor, suited for applications: metabolic assessment and analytical instrumentation.
PrimePell Infrared Methane Sensor uses the non-dispersive infrared method to detect the presence of hydrocarbon gases.
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
COZIR series is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation, portable instruments or solar powered application
Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity.