Sensors&Transmitters
(1817 products)
High-temperature Gage Pressure Transmitters 0-160MPa - MIDA-SG-12-11-H
SG-12-11-H is a high-temperature pressure transmitter, 0-160MPa, high stability, wear resistance, impact resistance and anti-corrosion
Gage Pressure Transmitters 0~160MPa, -40~80℃ - MIDA-SG-13
SG-13 is a Gage Pressure Transmitters, 0~160MPa, Operating temperature range -40~80℃,
Infrared Thermopile Temperature Sensor - TS318-1B0814
TS318-1B0814 used for contactless temperature measurement in many applications; transfer the heat radiation emitted from the objects into a voltage output.
Honeywell Integrated Relative Humidity Sensor - HIH-4000
The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users.
Thermopile Infrared Temperature Sensor Module - TSEV01CL55
TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation.
Smart Temperature and Humidity Probe HygroClip2 Sensor probe - HC2-S
The HC2-series are digital humidity-temperature probes based on the AirChip 3000 technology.
Platinum Resistance Temperature Sensor - STT-S
The STT-S style platinum resistance temperature sensors are suitable for the equipment surface and internal temperature measurement.
Fiber Optic Pressure Sensor - FOP-C
FOP-C is a fiber optic pressure sensor designed for general industrial applications in harsh and hazardous environments, where very high pressure conditions.
Fiber Optic Temperature Sensor - FOT-L
The FOT-L-SD and FOT-L-BA are fiber optic temperature sensors perfectly suited for harsh environmental conditions.
High-Temperature Fiber Optic Pressure Sensor - FOP-MH
FOP-MH is a fiber optic pressure sensor designed mainly for applications where extreme temperature conditions can be found such as aerospace and defense.
Fiber Optic Pressure Sensor - FOP-M
FOP-M is a fiber-optic pressure sensor designed mainly for applications where high temperature conditions can be found such as in aerospace and defense.
Fiber Optic Pressure Sensor - FOP-MIV
FOP-MIV has been especially designed and tested to fulfill the highest of medical performance requirements.
Fiber Optic Medical Pressure Sensor - FOP-M260
FOP-M260 Fiber Medical Pressure Sensor is used in several FDA and CE approved devices in a variety of clinical applications.
Fiber Optic Signal Conditioner Universal Multichannel Instrument - UMI
UMI conditioner is designed to perform accurate multi-channel temperature, pressure, strain, refractive index, and displacement measurements.
Infrared Gas Sensor for Oil Industry Methane Sensor - PrimePell
PrimePell Infrared Methane Sensor uses the non-dispersive infrared method to detect the presence of hydrocarbon gases.
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor - MisIR
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
Probe Type NDIR CO2 Sensor - COZIR-Probe
COZIR series is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation, portable instruments or solar powered application
Digital Temperature and Humidity Sensor with PCBA - HTU21D PCBA
HTU21D PCBA sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
Capacitive Temperature and Humidity Sensor - HTS2230SMD
HTS2230SMD Based on a unique capacitive cell for humidity measurement and a Negative Temperature Coefficient (NTC) thermistor for temperature measurement.
Voltage Output Temperature and Humidity Sensor - HTG3513CH
humidity sensor HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable
Temperature Humidity Sensor Module - HTF3223LF
humidity sensor HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed
Voltage Output Humidity and Temperature Sensor Module - HTG3835PVBL
HTG3835PVBL is dedicated humidity and temperature plug and play transducer designed for OEM applications where reliable and accurate measurements are needed.
Humidity and Temperature Sensor Module - HTG3535CH
HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
pre-calibrated module for Methane - NGM2611-E13
The NGM2611 is a pre-calibrated module for natural gas alarms which is precisely calibrated in Figaro’s humidity and temperature controlled facility.
Combustible Gases sensor - TGS816
Applications:
Domestic gas leak detectors and alarms;
Portable gas detectors
Ammonia Sensor - TGS826
Specifications:
1) Target gases: Ammonia
2) range：30-300 ppm
3) Circuit Voltage：Max. 24V (DC only
4) Heater Voltage：5.0±0.2V DC/AC
TGS826
Methane and Carbon Monoxide Sensor - TGS3870
1) Miniature size and low power consumption
2) Low sensitivity to alcohol vapor
3) Long life and low cost
4)CH and CO sensor
GS Yuasa Dissolved Oxygen Sensor KDS-25B - KDS-25B
a unique galvanic cell type sensor
water quality control.
KDS-25B sensor
water quality controller
Pre-calibrated Module for Carbon Dioxide - CDM4161A
1) Ultra compact size
2) High selectivity to CO2
3) Maintenance free
4) Low power consumption
5) Long life
6) Pre-calibrated
7)CO2 module
Infrared Gas Sensor - MPY20-HC-CH4
NDIR gas sensor detects gas by causing molecular vibration of target gas by incident infrared rays.
Infrared Gas Sensor - MPY20-HC-C3H8
good stability, strong selectivity, no oxygen dependence, wide range of detection, long service life, long maintenance cycle
Infrared Gas Sensor - MPY20-CO2
The gas sensor based on the infrared absorption principle has the following strengths: good stability.
NDIR Gas Sensor - MTP40-F
It supports two calibration methods: self-calibration and manual calibration, and the data accuracy error is extremely small.
NDIR CO2 gas Dual Channel Sensor Module - MTP50-A
NDIR gas sensor uses the principle of NDIR to detect the gas in the air.
Infrared particulate matter sensor - MPM20-AH
MPM20 series dust sensor is a self-priming infrared dust sensor.
Air Laser Particulate Matter Sensor - MPM12-BG
MPM12 series laser dust sensor adopts laser scattering principle.
Air Laser Particulate Matter Sensor - MPM13-AS
MPM13 series laser dust sensor adopts laser scattering principle.
Air Laser Particulate Matter Sensor - MPM14-CS
MPM14 series laser dust sensor adopts laser scattering principle.
Air Laser Particulate Matter Sensor - MPM11 series
MPM11 series laser dust sensor adopts laser scattering principle, with stable light source, constant light intensity, fast response, high detection accuracy and
Laser Particulate Matter Sensor - MPM10 series
MPM10 series laser dust sensors adopt the principle of laser scattering, and are small in size.
Integrated photoelectric liquid level sensor - FS-IR2016D
Integrated photoelectric liquid level sensor (contact type)
Carbon Dioxide Infrared Sensor - MSH-CO2
Dynament infrared sensors operate by using the NDIR principle to monitor the presence of target gas.
Oxygen Sensor-Replacement for A2C, OX2 and T2 - XLT-12-123
XLT-12-123, replaces A2C, OX2 & T2, This PPM oxygen sensor is galvanic type oxygen sensor with excellent stability and accuracy under stringent applications.
Oxygen Sensor - PSR-12-223
PSR-12-223 This advanced galvanic type oxygen sensor offers excellent stability and accuracy under stringent applications.
Oxygen Transmitter - SenzTx
The SenzTx is a compact and robust O2 transmitter that utilises zirconia or electrochemical technology to give a reliable measurement of oxygen concentration.
SemeaTech Electrochemical H2S-1000 Sensors - 4-Series H2S-1000
This sensor is designed for the measurement of Hydrogen Sulfide concentration in gas phase.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-6
The OKS-6 oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-11
The OKS-11 oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-12
The OKS-12 oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-21
The OKS-21 oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-250B
The OKS-250B oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-250E
The OKS-250E oxygen sensor provides high levels of accuracy, reliability, and linearity throughout its measurement ranges.
Ultrasonic Sensors - MA40S4S
This product specification is applied to the Transmitter of Ultrasonic Transducer (Open Type Structure).
