Transmitter (Voltage Amplifier) of Photocurrent to 0 - 5 V Signal - VOLTCON Series
• voltage amplifier
• conversion of photocurrent into a 0 to 5 V output signal
• maximum photocurrent: 500 µA, 5 µA or 50 nA
• Supply voltage: 7 - 24 V
• Dark output voltage: < 1 mV
• Operating temperature: -20 ... +80 °C
- Model Number: VOLTCON Series
- Data Sheet:
- Quantity:
- - +
Product Specification
VOLTCON series
Transmitter of photocurrent to 0 - 5 V signal
VOLTCON series Transmitter (Voltage Amplifier) of photocurrent Properties
The VOLTCON converts a photocurrent into an output voltage between 0 and 5 V and can be connected to any PLC system.
Three models with different measurement ranges are available. The amplification factor (gain) can be adjusted by a potentiometer. The measurement range can also be customized by replacing passive components.
VOLTCON series Transmitter (Voltage Amplifier) of photocurrent Specifications
|
Parameter |
Value |
|
Photocurrent measurement range |
VOLTCON_low 500 µA |
|
VOLTCON_med 5 µA |
|
|
VOLTCON_high 50 nA |
|
|
Supply voltage |
7* ... 24 V (*usable down to 5V, but this is not recommended) |
|
Gain adjustment range |
± 35% |
|
Dark output voltage |
< 1 mV |
|
Dimensions |
13 x 26 x 8 mm (WxLxH) |
|
Operating temperature |
-20 ... +80 °C |
|
Storage temperature |
-40 ... +80 °C |
|
Standards |
RoHS 2 2011/65/EU, DIN IEC 60381-2 |
We strongly recommend to process this product on ESD protected workplaces.
If you cannot find what you want, you can entrust OFweek to source for you. Just click:
Sourcing Service
