Home | Sensors&Transmitters| Gas Sensor| Semiconductor Gas Sensors

Tin Dioxide Semiconductor Gas Sensor for Solvents Detection - SP-31-00

  • Tin Dioxide Semiconductor Gas Sensor for Solvents Detection
  • Tin Dioxide Semiconductor Gas Sensor for Solvents Detection
Mouse over image to zoom

• Target gas: Alcohol/Toluene
• Heater voltage: 5.0 V ± 4%
• Circuit voltage: 5.0 V ± 4%
• Operating temperature: -10°C to 60°C
• Storage temperature: -20°C to 70°C
• Relative humidity: Less than 95% RH
• Sensor resistance: 0.5 kΩ to 5.0 kΩ
• Industrial gas leak detector

  • Model Number: SP-31-00
  • Data Sheet: Date Sheet File
Quantity:
- +
Inquire Now Add to cart

Product Specification

SP-31-00 Gas Sensor for Solvents Detection Description
The SP-31 is a tin di-oxide semiconductor gas sensor which has a high sensitivity to solvents such as alcohol, toluene.

SP-31-00 Gas Sensor for Solvents Detection Application
• Industrial gas leak detector

SP-31-00 Gas Sensor for Solvents Detection Specifications

Standard Operating conditions
Symbol
 Parameter
 Specification
 Conditions etc.
VH
 Heater voltage
 5.0 V ± 4 %
 AC or DC
VC Circuit voltage
 5.0 V ± 4 %
 AC or DC
RL Load resistance
 Variable
 PS < 15 mW
RH Heater resistance
 56 Ω ± 2 Ω
 at room temperature
PH Heater power consumption
 315 mW (Typical value)
 PH = VH2 / RH
PS
 Power dissipation of
sensing element
 Less than 15 mW
 PS =(VC - VRL)2/RS
Environmental conditions
Symbol
 Parameter
 Specification
 Conditions etc.
Tao
 Operating temperature
 -10°C to 60°C
 Recommended range
Tas
 Storage temperature
 -20°C to 70°C
RH
 Relative humidity
 Less than 95% RH
(O2)
 Oxygen concentration
 21% ± 1%
(Standard condition)
 Absolute minimum level:
more than 18%
The sensitivity characteristics are influenced by the
variation in oxygen concentration.
Sensitivity characteristics
Model
 SP-31-00
Symbol
 Parameter
 Specification
 Conditions etc.
RS
 Sensor resistance
 0.5 kΩ to 5.0 kΩ
 At 300 ppm of ethanol/air
β
 Sensitivity slope
 0.15 to 0.35
 Rs at 300 ppm of ethanol
Rs at 50 ppm of ethanol
Standard Test Conditions:
 Temp: 20°C ± 2°C
Humidity:65% ± 5%
(in clean air)
VC : 10.0 V ± 0.1%  
VH : 5.0 V ± 0.05%  
RL : 3.9 kΩ ± 5%    
Pre-heating time: more than 48 hours
Mechanical characteristics
Items
 Conditions
 Specifications
Vibration
 Frequency:
Vertical amplitude:
Duration:
 100 cpm
4 mm
1 hour
 Should satisfy the
specifications shown in the
sensitivity characteristics.
Shock
 Acceleration:
Number of impacts:
 100 G
5 times

If you cannot find what you want, you can entrust OFweek to source for you. Just click:

Sourcing Service

Recommended Products