HF Resistant Laboratory pH Electrodes - S350CDHF Series/S450CDHF
• Resist attack and etching from HF (up to 2% v/v)
• Resist coating and fouling
• Compatible with any pH meter
• Wetted Materials: Epoxy, pH glass, porous HDPE
• Range of Measurements: 0-12 pH
• Pressure Maximum: 50 Deg. C/100psig
• Temperature Range: 0 - 50 Deg. C
• Speed of Response: 95% in 5 seconds
- Quantity:
- - +
Product Specification
HF Resistant Laboratory pH Electrodes
Item No.: S350CDHF, S353CDHF, S354CDHF, S450CDHF
HF Resistant Laboratory pH Electrodes Features
• Resist attack and etching from HF (up to 2% v/v)
• Resist coating and fouling
• Compatible with any pH meter
HF Resistant Laboratory pH Electrodes Description
Specifications differences for use in hydrofluoric acid (HF) are shown in SPECIFICATIONS section below. Please note 2 major differences as compared to standard electrodes. First, pH range is 0-12 not 0-14. Second, the temperature range is 0-50 deg C.
This series of electrodes are compatible with any lab or portable pH meter. Calibration of these electrodes is as normal with any standard pH electrode using standard pH buffer solutions.
HF Resistant Laboratory pH Electrodes Specifications
Wetted Materials |
Epoxy, pH glass, porous HDPE |
Range of Measurements |
0-12 pH |
Pressure Maximum |
50 Deg. C/100psig |
Temperature Range |
0 - 50 Deg. C |
Speed of Response |
95% in 5 seconds |
Maximum Suggested HF% |
2% v/v |
HF Resistant Laboratory pH Electrodes Ordering Information
The HF models of these electrodes are available for our in-line, submersion and insertion (wet tap) models as follows:
Sensors |
|
S350CDHF |
Epoxy body, 150mmL x 12mm OD, 30 in cable |
S353CDHF |
Flat surface KYNAR submersion pH electrode |
S354CDHF |
Flat surface CPVC submersion pH electrode with
protective tip |
S450CDHF |
Flat surface CPVC side stream pH electrode |
EXT Cable DIN-EL |
Ext cable for models with DIN cap
(S353CDHF, S354CDHF) |
If you cannot find what you want, you can entrust OFweek to source for you. Just click:
Sourcing ServiceRecommended Products
-
Modular Flat Surface pH & ORP Electrodes
-
Industrial Contacting Conductivity Sensors
-
Toroidal Conductivity Sensor
-
Sanitary Flange Mounted Conductivity/Resistivity Sensor
-
Low Cost Epoxy Body Conductivity Sensors
-
Submersible Flat-Surface, Self-Cleaning pH and ORP Electrodes
-
Side-Stream/By-Pass Flat-Surface, Self-Cleaning pH and ORP Electrodes
-
Ground-Loop Interrupt Flat-Surface Self-Cleaning pH and ORP Electrodes
-
Low Cost Submersion and In-Line pH Electrodes
-
Insertion/Wet-tap Flat-Surface, Self-Cleaning pH and ORP Electrodes