Sensors&Transmitters
(1812 products)
High Pressure Optical Liquid Level Sensors - OS-150
OS150 stainless steel optical level sensor is designed for high-pressure water and liquid level sensing, and is capable of measure with 1/16" accuracy.
Compact Metal Oxide Gas Sensor - MiCS-5524
MiCS-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection; suitable also for indoor air quality monitoring...
Classic Line 4-CH3SH-10 Methyl Mercaptan Sensor 0-10 ppm - CLE-3611-400
Classic Line 4-CH3SH-10 Methyl Mercaptan Sensor 0-10 ppm. Expected Operating Life 2 years in air. Operating conditions -20 to 50°C, 15 ~ 90%RH non-condensing.
Electrochemical Formaldehyde Sensor (CH2O Sensor) - NE-HCHO-S
NE-HCHO-S is applicable for detecting and measuring formaldehyde generated from woody construction material or remained concentration after sterilization.
Analog Humidity and Temperature Sensor - HTU21P
HTU21P(F) is a new humidity and temperature sensor which is with PWM interface, analog output.
Intelligent NDIR Infrared CO2 Sensor Module - MH-Z19B
MH-Z19B NDIR CO2 Sensor for indoor air quality monitoring, Range: 0-2000ppm/0-5000ppm CO2, Good stability, Long lifespan
Oxygen Gas Sensor (O2 Sensor) - 4OXV CiTiceL
4OXV CiTiceL Oxygen (O2) Gas Sensor is designed for operation in a wide range of environments and harsh conditions.
NDIR CO2 Sensor Module for Carbon Dioxide Detection - MH-Z14
MH-Z14 NDIR Infrared gas module is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the CO2 in the air.
Probe Humidity and Temperature Transmitter - CAEL-S16
CAEL-S16 Probe Humidity and Temperature Transmitter, 0 - 100%RH, 0 -1V/5V/10V, RS485, M12 - 4 pin connector.
Electrochemical Carbon Monoxide Gas Sensor (CO Sensor) - 4CM CiTiceL
4CM CiTiceL Carbon Monoxide Sensor (CO Sensor), 3 electrode miniature sensor with acid gas filter, Expected Operating Life 2 years in air.
Electrochemical Sulfur Dioxide Gas Sensor (SO2 Sensor) - 4S Rev. 2 CiTiceL
4S Rev. 2 CiTiceL Sulfur Dioxide Gas Sensor (SO2 Sensor), NEW 3 Electrode miniature sensor with H2S filter, Expected Operating Life 2 years in clean air.
MEMS Mass Flow Sensors - FS5001L Series
FS5001 series mass flow sensors are designed for general purpose flow monitoring and control applications. Flow Range from 0-200 sccm up to 0-6000 sccm.
Electrochemical Ethylene Oxide Gas Sensor (C2H4O Sensor) - 7ETO CiTiceL
7ETO CiTiceL Electrochemical Ethylene Oxide Gas Sensor (C2H4O Sensor), 3 Electrode compact sensor, Expected Operating Life Two years in air.
Electrochemical Phosphine Gas Sensor (PH3 Sensor) - 4PH-Fast CiTiceL
4PH-Fast CiTiceL Phosphine Sensor (PH3 Sensor), 3 Electrode minature sensor for phosphine with improved response time, Expected Operating Life 2 years in air.
Hydrogen Cyanide Gas Sensor (HCN Sensor) - 4HN CiTiceL
4HN CiTiceL Hydrogen Cyanide Gas Sensor (HCN Sensor), 3 Electrode minature sensor, Expected Operating Life Two years in air.
Ultra-Low Power Analog Nitrogen Dioxide Sensor Module - ULPSM-NO2 968-047
ULPSM-NO2 968-047 Ultra-Low Power Analog Sensor Module for NO2, 0 to 3 V Analog Signal Output, Measurement Range: 0 to 20 ppm.
15x15 Nitrogen Dioxide Sensor 0-5ppm P Package 110-507 - 3SP_NO2_5F P
3SP_NO2_5F P 15x15 Filtered 0-5 ppm NO2 Sensor in Pinned Package 110-507. Measurement Range: 0 to 5 ppm. Use for Air Quality Monitoring...
Digital Gas Sensor Developer Kit - DGSDK 968-045
DGSDK 968-045 Digital Gas Sensor Developer Kit. Easily add any SPEC Sensor to your design with our Open-Source Digital Gas Sensor Developer Kit.
15x15 Ozone Sensor O3 Sensor C Package 110-407 - 3SP_O3_20 C
3SP_O3_20 C 15x15 O3 Sensor C Package 110-407. Measurement Range: 0 to
15x15 Filtered 0-5ppm NO2 Sensor C Package 110-508 - 3SP_NO2_5F C
3SP_NO2_5F C 15x15 Filtered 0-5 ppm NO2 Sensor in C Package, Measurement Range: 0 to 5 ppm, used for Air Quality Monitoring...
15x15 Ozone Sensor O3 Sensor Pinned Package 110-406 - 3SP_O3_20 P
3SP_O3_20 P 15x15 Ozone Sensor O3 Sensor Pinned Package 110. Measurement Range: 0 to >20 ppm. Long Life. Low Power Consumption. Use for Air Quality Monitoring..
Digital Ozone (O3) Gas Sensor Module - DGS-O3 968-042
DGS-O3 968-042 Digital Ozone Sensor O3 Sensor Module, 0 to 5ppm Ozone sensor with digital output. 20 ppb Resolution.
Ultra-Low Power Analog Ozone (O3) Sensor Module - ULPSM-O3 968-046
ULPSM-O3 968-046 Ultra-Low Power Analog O3 Sensor Module, 0 to 3 V Analog Signal Output, Measurement Range: 0 to 20 ppm.
Digital Nitrogen Dioxide (NO2) Gas Sensor Module - DGS-NO2 968-043
DGS-NO2 968-043 Digital Gas Sensor Module for Nitrogen Dioxide (NO2), 0 to 10 ppm NO2 sensor with digital output.
Digital Temperature and Humidity Sensor Replace Sensirion SHT21 - HTU21
HTU21D is a digital humidity sensor (RH&T) with I2C format output which can pin to pin replace SHT21.
Probe Style Relative Humidity Sensor Module - HM1500LF
HM1500LF is a dedicated humidity transducer designed for OEM applications where a reliable and accurate measurement is needed.
Capacitive Humidity Sensor - HS1101/HS1101LF
HS1101LF Based on a unique capacitive cell, these relative humidity sensors are designed for high volume, cost sensitive applications
Voltage Output Temperature and Humidity Sensor - HTG3515CH
HTG3515CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
Frequency Output Temperature and Humidity Sensor - HTF3226LF
HTF3226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed.
Capacitive Temperature and Humidity Sensor - HTS2030SMD
HTS2030SMD Based on a unique capacitive cell for humidity measurement and a Negative Temperature Coefficient (NTC) thermistor for temperature measurement.
Relative Humidity Sensor - HM1520/HM1520LF
Based on the rugged HS1101LF capacitive humidity sensor, HM1520LF is a dedicated humidity transducer designed for measurements at low humidity.
Temperature and Humidity Sensor with PTFE membrane - HTU21DF
HTU21DF sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
Digital Relative Humidity and Temperature Sensor - HTU20D
HTU20D is a new digital humidity sensor with temperature output of MEAS. This sensor provides calibrated, linearized signals in digital, I²C format.
Relative Temperature and Humidity Sensor Module - HTF3000LF
Based on HS1101LF, HTF3000LF is a dedicated humidity and temperature sensor for OEM applications where a reliable and accurate measurement is needed.
Voltage Output Temperature and Humidity Sensor Module - HTM226LF
HTM226LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed.
Protective Temperature and Humidity Transmitter - JWSL-6
JWSL-6 Protective Temperature and Humidity Transmitter, suitable for hvac indoor environment temperature and humidity measurement.
Temperature and Humidity Transmitter (Wall Mounted) - JWSL-12
JWSL-12 Temperature and Humidity Transmitter (Wall Mounted), suitable for hvac indoor environment temperature and humidity measurement.
Digital Temperature and Humidity Transmitter with Display - JWST-10
JWST-10 Digital Temperature and Humidity Transmitter with Display, suitable for hvac indoor environment temperature and humidity measurement.
Low Cost and Small Cubage Temperature and Humidity Transmitter - JWSL-1
JWSL-1 is designed sensor and transmitter integrated, which can applied to the general indoor environment temperature and humidity measurement.
General Wall-mounted Temperature and Humidity Transmitter - JWSL-2
JWSL-2 is designed sensor and transmitter integrated, which can applied to the hvac level indoor environment temperature and humidity measurement.
Rigorous Industry Temperature and Humidity Transmitter - JWSK-6
JWSK-6 Temperature and Humidity Transmitter belongs to industrial products. The temperature measurement range from -40°C to +120°C.
Temperature and Humidity Transmitter - JWSK-5
JWSK-5 series temperature and humidity transmitter belongs to industrial product and can measure the temperature range from -40°C to 120°C.
High Accuracy Temperature and Humidity Transmitter - JWSH-8
JWSH-8 series temperature and humidity transmitters belongs to industrial products. The measurement is from -100°C to +200°C.
Wall Mounted Temperature and Humidity Transmitter - JWSL-9
Sensor, transmitter integrated design and big screen display is suitable for hvac indoor environment temperature and humidity measurement.
ORAKEL COD/TOC Sensor Waste Analyser - MMS-D016
The ORAKEL COD/TOC Sensor uses UV254 light as a surrogate measurement for detecting organics in water.
ORAKEL Chlorine Sensor - MMS-D010
The ORAKEL Chlorine Sensor range is particularly suited to working in sites where reliability and ease of use are most important.
P-type Metal Oxide VOC Sensor - VOC-MF1, VOC-PF1, VOC-AF1
VOC-MF1, VOC-PF1, VOC-AF1 P-type Metal Oxide VOC Sensor, no passive filter fitted, Volatile Organic Compounds (VOCs) detection for low cost IAQ applications.
Thin-film Humidity Sensing Element - SH
SH Thin-film Humidity Sensing Element. Low cost, Operating temperature up to 200°C, Short response time, Long-term stability.
2-wire Humidity Transmitter - RHT
RHT Humidity Transmitter. Low cost, Temperature compensation system, 2-wire 4-20 mA output, built-in temperature transmitter, IP65 protection.
Humidity Probe for Handheld Meters - RHA
RHA Temperature/Humidity Probe for Handheld Meters, Low cost, Voltage output signal, operates w/ H5800, built-in temperature sensor.
Multi-function Humidity and Temperature Transmitter - CAEL-HT Series
CAEL-HT Series Humidity and Temperature Transmitter. 0-100%RH, 4-20mA, 0-10V, RS485, Relay Alarm, Dip switch, Configure adapter, M12 remote probe.
Single Element Uncooled VPD PbSe Detector - LEPTON
Single element uncooled VPD PbSe detector, in 2 standard sizes: 1x1 mm2, 2x2 mm2, packaged in SMD or TO-5 (with cap, hermetic) with sapphire window.
Electrochemical Carbon Monoxide Sensor (CO Sensor) - CM9
CM9 Electrochemical Carbon Monoxide Sensor, Carbon monoxide detection range: 0-10000ppm.
Electrochemical Carbon Monoxide Sensor (CO Sensor) - CM8
CM8 Electrochemical Carbon Monoxide Sensor, Carbon monoxide detection range: 0-10000ppm,
Single Point Load Cell - 651KS22 / 651KSGS
651KS22 Single Point Load Cell, Stainless steel, Welded Seal, IP68/IP69K.
651KSGS Single Point Load Cell, Environmentally Sealed, IP66.
Stainless Steel Single Point Load Cell - 651HS
651HS Stainless Steel Single Point Load Cell, Welded Seal, IP68/IP69K. Rated Capacities: 6kg, 12kg, 20kg, 30kg, 50kg, 60kg.
Single Ended Beam Load Cell - 563RS
563RS Single Ended Beam Load Cell, Stainless steel, Welded Seal, IP68. Rated Capacities: 5kg, 10kg, 20kg, 50kg, 100kg, 200kg, 350kg, 500kg.
Compression Load Cell - 363YH
363YH Compression Load Cell, Alloy steel, Welded Seal, IP67. Rated Capacities: 1t, 2t, 3t, 5t, 10t, 20t, 30t, 50t, 100t, 150t, 200t, 300t. CE and RoHS certified
Compression Load Cell - 276EH
276EH Compression Load Cell, Alloy steel, Environmentally Sealed, IP67. Rated Capacities: 5t, 10t, 25t, 50t, 100t.
Compression Load Cell - 266AA / 266AH
266AA Compression Load Cell, Aluminum, Environmentally Sealed, IP66.
266AH Compression Load Cell, Alloy steel, Welded Seal, IP67.
