Toroidal Conductivity Sensor - SE 656
- Robust design
- Extremely large measuring range due to inductive measuring principle
- Insensitive to contamination
- No process-wetted electrodes
- Extremely high chemical resistance (PFA)
- Measurement in hazardous locations
- Quantity:
- - +
Product Specification
SE 656 Toroidal Conductivity Sensor
Special and precise sensor with high chemical resistance over a very large measuring range, for heavily polluted and strongly oxidizing mediaCorrosion-resistant toroidal sensor for measuring pure water up to maximum conductivities. Insensitive to strongly oxidizing media. Smooth, easy-to-clean design.
High accuracy due to electrodeless measurement.
Low risk of contamination because of large sensor opening.
Also suitable for hazardous locations.
SE 656 Toroidal Conductivity Sensor Applications
Conductivity measurement of highly concentrated acid and alkaline solutions, hydro-fluoric acid, nitric acid, concentrated sulfuric acid, oleum, concentrated alkaline solutions, strongly oxidizing media
SE 656 Toroidal Conductivity Sensor Facts
- Robust design
- Extremely large measuring range due to inductive measuring principle
- Insensitive to contamination
- No process-wetted electrodes
- Extremely high chemical resistance (PFA)
- Measurement in hazardous locations
SE 656 Toroidal Conductivity Sensor Specifications
Cell factor |
Approx. 2/cm (≥ 30 mm distance to wall) |
Measuring range |
0.002 to 2000 mS/cm |
Accuracy |
± (5 µS/cm +0.5 % measured value) at –20 °C … +100 °C ± (10 µS/cm +0.5 % measured value) at >100 °C |
Material |
Cell:PFA ; Gasket:FFKM (Chemraz) |
Temperature detector |
Pt 100 (Class A) |
Temp. response time t90 |
Approx. 11 min |
Temperature |
-20 … +125 °C |
Pressure |
0 ... 16 bar |
Cable |
Fixed cable, 5 m |
Protection |
IP 68 (when mounted) |
Assembly |
G 3/4" (36-mm nut and FFKM (Chemraz) gasket included in shipment) |
ATEX Certificate (SE 656 X) |
II 1 G Ex ia IIC T4/T6 Ga |
If you cannot find what you want, you can entrust OFweek to source for you. Just click:
Sourcing ServiceRecommended Products
-
Modular Flat Surface pH & ORP Electrodes
-
Industrial Contacting Conductivity Sensors
-
Toroidal Conductivity Sensor
-
Sanitary Flange Mounted Conductivity/Resistivity Sensor
-
Low Cost Epoxy Body Conductivity Sensors
-
Submersible Flat-Surface, Self-Cleaning pH and ORP Electrodes
-
Side-Stream/By-Pass Flat-Surface, Self-Cleaning pH and ORP Electrodes
-
Ground-Loop Interrupt Flat-Surface Self-Cleaning pH and ORP Electrodes
-
Low Cost Submersion and In-Line pH Electrodes
-
Insertion/Wet-tap Flat-Surface, Self-Cleaning pH and ORP Electrodes