Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor - OKS-1

  • Medical Electrochemical Galvanic Fuel Cell Percent Oxygen Sensor
Mouse over image to zoom

• ​Measures Oxygen From 0 to 100%
• ​Electrochemical Fuel Cell Sensor Technology
• ​Self Containted, No Need To Add Electrolyte
• ​Excellent Stability, Performance & Linearity
• ​Competitive Field Replacement

  • Model Number: OKS-1
  • Data Sheet: Date Sheet File
Quantity:
- +

Product Specification

1.OKS-1 Electrochemical Oxygen Sensor Descriprion:

• Measures Oxygen From 0 to 100%

• Electrochemical Fuel Cell Sensor Technology

• Self Containted, No Need To Add Electrolyte

• Excellent Stability, Performance & Linearity

• Competitive Field Replacement

 

2.OKS-1 Electrochemical Oxygen Sensor Specifications:

Sensor Technology

Electrochemical

Signal Output1

9 - 13 mV

Measuring Range

0 - 100 Percent

Response Time T90

13 Seconds

Accuracy Full Scale2

± 1% of Signal

Repeatability F.S.

± 0.5%

Temperature

Compensated

Operating Temp

0 to 45

Storage Temp

0 to 45 ℃

Cross Sensitivity

Meets EN12598

Recommended Flow

0.4 - 20 SCFH

Housing Material

White ABS

Humidity

0 - 100% RH(Non - Condensing)

Expected Life3

< 60 Months

Storage

12 Months

Warranty4

12 Months

1. Signal Output is measured in air at 25 º C, Sea Level.

2. Full Scale Accuacy is calculated with constant pressure, temperature and proper calibration (80% O2 Value on

Full Scale Range). Drastic Temperature change can result in a maximum error of ± 10%.

3. Expected life is calculated when O2 < 20.9% @ 25 º C, Sea Level.

4. Oksidyne Healthcare Ltd. Warrants the sensors for the period noted above to be free from defects in materials

and workmanship. Oksidyne will not be held liable for sensors damaged due to customer neglect.

4. Oksidyne Healthcare Ltd. sensors are tested and validated to BSI Standard BS EN 50104:2010

 

3.OKS-1 Electrochemical Oxygen Sensor Electrical & Gas Connection:

• M16 x 1.0mm Thread w/ O’ring

• 3-Pin Molex Header (MOLEX 22-29-2031)

 

4.OKS-1 Electrochemical Oxygen Sensor Electrical & Gas Intended Use:

    These oxygen sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care, incubators and general oxygen monitors.



If you cannot find what you want, you can entrust OFweek to source for you. Just click:

Sourcing Service