Home | Sensors&Transmitters| Gear Tooth Speed Sensors

Hall Effect Gear Tooth Speed Sensors - GS1005-GS1007 Series

Mouse over image to zoom

• From near zero speed up to 15 kHz sensing capability
• Vibration: Sinusoidal, 15 g max from 40 Hz to 2 kHz
• Operating Supply Voltage: 5 to 24 VDC
• Supply Current: 3 mA typ., 6 mA max
• Compatible with unregulated power supply
• RoHS compliant
• IP67
• Typical air gap of 1.5 mm

Model Number: GS1005-GS1007 Series
Data Sheet:

Quantity:: - +

Inquire Now Add to cart

Product Specification

GS1005 - GS1007 Sensors
Hall Effect gear tooth speed sensor with adjustable anodized aluminum housing

GS1005-GS1007 Series Gear Tooth Speed Sensors Description
The GS1005-GS1007 series gear tooth speed sensors are Hall Effect devices designed for use in applications where ferrous edge detection/near zero speed sensing is needed. They provide a sinking current output.

GS1005-GS1007 Series Gear Tooth Speed Sensors Features
• From near zero speed up to 15 kHz sensing capability
• 10 bit dynamic threshold direction offers:
- Automatically adjusting magnetic range
- Self-compensating to target geometry
• Compatible with unregulated power supply
• RoHS compliant
• IP67
• Typical air gap of 1.5 mm*

GS1005-GS1007 Series Gear Tooth Speed Sensors Typical Applications
• Speedometers
• Anti-lock braking systems
• Exercise equipment
• CNC machine tools

GS1005-GS1007 Series Gear Tooth Speed Sensors Environmental Specifications

Vibration	Sinusoidal, 15 g max from 40 Hz to 2 kHz
Mechanical Shock Resistance	50 g
Maximum Speed Detection	15 kHz
Operating Temperature (GS100501)	-40 ⁰C to 105 ⁰C (-40 ⁰F to 221 ⁰F)
Operating Temperature (GS100502, GS100701)	-40 °C to 125 ⁰C (-40 ⁰F to 257 ⁰F)
Storage Temperature	-40 °C to 125 ⁰C (-40 ⁰F to 257 ⁰F)
Ingress Protection	IP67

GS1005-GS1007 Series Gear Tooth Speed Sensors Electrical Specifications

Operating Supply Voltage	5 to 24 VDC
Maximum Input Voltage	30 VDC
Maximum Reverse Voltage	24 VDC
Supply Current	3 mA typ., 6 mA max
Output Sink Current	20 mA max
Recommended Pull-Up Resistor	See chart

GS1005-GS1007 Series Gear Tooth Speed Sensors Mechanical Specifications

Housing Material	Anodized Aluminum
Maximum Installation Torque Limit	5.65 Nm (50 in lb) on threads
Operating Air Gap / Sensing Distance* 1.5 mm (0.06") * With recommended target type; see drawing	1.5 mm (0.06")
Sensor Orientation	Not sensitive

Products

Part Number	Thread	Leads	Connector
GS100501	M12-1		12 mm, 4-pin circular mating connector, type IEC 60947-5-2
GS100502	M12-1	20 AWG x 1 m
GS100701	15/32"-32	20 AWG x 1 m