Mouse over image to zoom
Hydrogen Cyanide Gas Sensor (HCN Sensor)
-
Price
Price on request ≥1piece
-
Model Number
4HN CiTiceL -
Data Sheet
-
Package
Original packaging -
Specs
4HN CiTiceL -
Quantity
- +Send Inquiry
Product Description
4HN CiTiceL
Hydrogen Cyanide (HCN) Gas Sensor
APPLICATION NOTE: Not suitable for repeated or continuous exposures
4HN is designed for life safety applications where the sensor is only exposed to gas occasionally. Repeated or continuous exposures will result in significant output drift and shortened operating life.
If the sensor is exposed to gas, functionality and performance characteristics should be checked to confirm that the sensor is still performing within acceptable limits.
Technical Specifications
* Specifications are valid at 20°C, 50% RH and 1013 mBar, using City Technology recommended circuitry. Performance characteristics outline the performance of sensors supplied within the first 3 months. Output signal can drift below the lower limit over time.
Poisoning
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments
and operation.
When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.
Hydrogen Cyanide (HCN) Gas Sensor
APPLICATION NOTE: Not suitable for repeated or continuous exposures
4HN is designed for life safety applications where the sensor is only exposed to gas occasionally. Repeated or continuous exposures will result in significant output drift and shortened operating life.
If the sensor is exposed to gas, functionality and performance characteristics should be checked to confirm that the sensor is still performing within acceptable limits.
Technical Specifications
| MEASUREMENT | |
| Operating Principle | 3-electrode electrochemical |
| Measurement Range | 0 - 50 ppm HCN |
| Filter | None |
| Sensitivity* | 0.10 ± 0.02 µA/ppm |
| Response Time (T90)* | <200 Seconds at 20°C |
| Resolution (Electronics dependant) | 0.5 ppm |
| Baseline Offset (clean air) | -0.5 to +0.5 ppm HCN equivalent |
| ELECTRICAL | |
| Recommended Load Resistor | 10 Ω |
| Bias Voltage | Not Required |
| MECHANICAL | |
| Weight | 5 g |
| Housing Material: | |
| Cap | ABS |
| Body | ABS |
| Orientation | Any |
| ENVIRONMENTAL | |
| Operating Temperature Range | -20°C to +50°C |
| Recommended Storage Temp | 0°C to 20°C |
| Operating Pressure Range | Atmospheric ± 10% |
| Operating Humidity Range | 15 - 90% RH non-condensing |
| LIFETIME | |
| Expected Operating Life | Two years in air |
| Storage Life | 6 months in CTL container |
* Specifications are valid at 20°C, 50% RH and 1013 mBar, using City Technology recommended circuitry. Performance characteristics outline the performance of sensors supplied within the first 3 months. Output signal can drift below the lower limit over time.
Poisoning
CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However, it is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instruments
and operation.
When using sensors with printed circuit boards (PCBs), degreasing agents should be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing of the plastic.