AirMaster 6100D is a cost effective and high performance 450MHz FDDLTE outdoor CPE designed to enable quick LTE fixed data service deployment to the remote customers. It provides high data throughput and advanced networking features to end users who need both bandwidth and quality service in the remote area.
Cost effective & compact design with built-in LTE MIMO antennas.
Compliant to 3GPP LTE Release 9
Advanced 2x2 MIMO and UL QAM64 support (CAT5)
Router, bridge and by-pass networking, IPv4 & IPv6 and Multiple PDN support
USIM card authentication support
Secure Telnet, FTP, HTTP and TR069 OTA management support
48V PoE power supply and pole or wall mounting support
AirMaster 6100D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 115Mbps max throughput over the air. The typical coverage should be more than 20km with reasonable good throughput performance.
EASY USAGE & MANAGEMENT
AirMaster 6100D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the AirMaster 6100D have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.
AirMaster 6100D offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.
AirMaster 6100D design is based on the standard implementation of LTE release 9 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. AirMaster 6100D is a CAT5 CPE and supports advance features such as 2x2 DL MIMO, optional QAM64 modulation on the uplink.
With high gain directional patch antenna, AirMaster 6100D enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services.
AirMaster 6100D also has built-in router function and VPN (PPTP, L2TP, GRE) client support to provide greater service flexibility and reliability. The standard PoE support, easy-to-read signal strength and data activity indicators in the back panel make it intuitive for users to install and check the status of the device.
- Packing: 250mm(L) * 250mm(W) * 75mm(D)
- Shipping: shenzhen
- 450M/Band31 Lte CPE
- Multi Mode 4G Lte Outdoor CPE
- 4G Outdoor Lte CPE
- 4G Indoor Lte CPE
- 4G LTE 450MHz Band31 indoor CPE