PCB mounting film capacitors
electronicspecifier | Posted: 21 Aug 2017, 08:12
New Yorker Electronics is now distributing ASC Capacitors' new MEC-DL film capacitors, designed for PCB board mounting. These are said to be ideal for frequency converters, micro inverters and DC filtering applications. Their lead spacing and compact size are conducive for low inductance (<1nH per mm of lead spacing).
The MEC-DL Series is available with a single lead or dual leads depending on current or application requirements. Noted for their low ESR and dry construction, the series has a capacitance range of 10uF to 100uF and voltages of 450VDC, 850VDC and 950VDC. They are housed in a PBT case with epoxy fill and metallized polypropylene.
These film capacitors can be used in arrays for bulk capacitance, for placement near or around high frequency circuits. The film is also segmented to minimize capacitance loss.
ASC Capacitors MEC-DL onboard film capacitors are high-frequency, high-stability, large current capacitors designed for DC links, connecting rectifiers and inverters. They have tolerance options of either ±5% or ±10% and a VDC of either 450 or 850.
ASC Capacitors MEC-DL Metalized Polypropylene high humidity resistant film capacitors for DC Link are similarly high-frequency and high-stability and are used in DC linking and filtering and inverter circuits for appliances. But with their high tolerance for high humidity, they are also used for industrial power supplies, wind power generation and solar inverters. They also feature self-healing and fuse action for higher safety at end of life.
ASC Capacitors MEC-DL low-profile DC film capacitors are custom ordered only. The low-profile version offers a capacitance range of 13uF to 66uF, have a ±10% tolerance and come in 450VDC and 850VDC. The terminals are tin-plated copper wire and mounted in PCB through hole.
Allegro MicroSystems Europe has introduced a new high accuracy Hall-effect-based current sensor IC with multiple programmable fault levels intended for industrial and consumer applications with a focus on motor control and power inverter stage applications.
Global provider of engineered electronics for performance critical applications, TT Electronics, has extended its MFC series of metal foil chip resistors with a new 2817 size that can dissipate up to 3W.
Amphenol RF has introduced the ATC-PS series of amplitude and phase stable test cables.
A number of pre-prepared cable assemblies that provide compatible solutions for key product ranges from Molex are now available at distributor RS Components.
Availability and full design support capabilities for a power limiter from Peregrine Semiconductor have been announced by Richardson RFPD.
The S71KL512SC0 HyperFlash and HyperRAM Multi-Chip Package (MCP) from Cypress Semiconductor is available at Mouser Electronics.
The PolarFire Evaluation Kit from Microsemi, which allows designers to evaluate the PolarFire FPGA product family is now being shipped by distributor Mouser Electronics.
binder just announced a field assembly M12 connector designed for power handling applications across many industrial sectors where, according to the company, the adoption of automation technology is becoming widespread.
In response to the growth trend of mobile and wearable devices, memory manufacturer Apacer has launched industrial Micro SD/Micro SDHC memory cards which conform to SD 3.0 specifications.
Able to withstand extremely harsh environments and high mechanical loads the cable was designed for an above-average service life, while its small outer diameter of only 22 mm belies the sophisticated engineering of the cable.
IXYS Corporation a power semiconductors, mixed-signal and digital ICs for power conversion and motion control applications company has announced the introduction of the IXRFD615 ultrafast low-side RF MOSFET gate driver by its IXYS Colorado division.
The new 3W AAF-03 and 5W AAF-05 families of ultra-miniature encapsulated power module in a 1x1x0.64” PCB Mount package has been introduced by MINMAX.
Wolfspeed, supplier of silicon carbide (SiC) power products has advanced the development of high efficiency data centre power supplies through the implementation of an innovative totem-pole PFC topology that employs its latest low-inductance SiC MOSFETs to exceed an 80+ Titanium rating.
The LMX2594 wideband PLLatinum radio frequency (RF) synthesiser from Texas Instruments (TI) is now being shipped by Mouser Electronics.
When manufacturing control gear and switchgear systems, wires and cables routinely have to be connected to copper busbars.
Provider of semiconductor products that enable secure and intelligent processing for enterprise, data centre, cloud, wired and wireless networking, Cavium, showcased a broad range of NVMe over Fabric solutions.
ALPS Electric has developed the “GLU Series” Liqualloy Power Inductor.
An extension to its 220 EDLC ENYCAP series of electrical double-layer energy storage capacitors has been announced by Vishay Intertechnology.
Now available in Europe through TTI are Minitek 2.0mm receptacles from Amphenol FCI.
Manufacturer of microcontroller, memory and analogue semiconductors, Microchip has announced the MPLAB ICD 4, an in-circuit programming and debugging development tool for Microchip’s PIC microcontroller and dsPIC digital signal controller portfolios.
A new high accuracy Hall-effect-based current sensor IC has been introduced by Allegro MicroSystems with multiple programmable fault levels intended for industrial and consumer applications with a focus on motor control and power inverter stage applications.
Radio Frequency Systems (RFS), has introduced a new generation of radiating cable connectors that are specifically designed to meet operators’ needs for lower passive intermodulation (PIM) and faster, easier installations.
Radio Frequency Systems (RFS), now offers a comprehensive range of RADIAFLEX radiating cables and CELLFLEX feeder cables that are certified as compliant with the European Union’s (EU’s) Construction Products Regulation (CPR).
Dog lovers can now add a touch of technology to walkies, following the launch of a new revolutionary dog drone. The DJI Phantom 4 Dog Drone, which can be purchased from drones e-tailer, DronesDirect.co.uk, is a useful tool for walking those pampered pooches.
Drones have been the future technology to watch for the past few years, and according to CCTV.co.uk it looks like we’re still not done thinking about their potential.
Global connectivity and sensor provider, TE Connectivity (TE), offers a range of connectivity solutions for diverse motor types.
A new line of E and W-band PIN diode waveguide switches has been launched by provider of RF, microwave and millimeter wave products, Pasternack.
Suitable for cabling, installation and maintenance for conventional wiring of applications like motors, servo drives and linear units/drives, CONEC has launched a hybrid power and signal circular connector that saves both time and costs.
TDK has presented leaded EPCOS metal oxide disk varistors, which have now been approved for an increased operating temperature of 105°C (previously 85°C).
Manufacturer of resistive components, Stackpole Electronics, has announced its KAL series.
Epiwafer foundry and substrate maker IQE plc of Cardiff, Wales, UK says that, for...
Worldwide semiconductor revenue are expected to pass USD 400 billion for the first time...
NAURA New Energy, a leading lithium battery equipment supplier, has developed online...
Fujitsu and SAP has expanded their global partnership to offer advanced ERP solutions...