Post Buying Request
Home » Products » High Quality Good Performance Ceramic Resistor Ignitor 150W-250W

High Quality Good Performance Ceramic Resistor Ignitor 150W-250W

Country of Origin: Fujian China (Mainland)
Brand Name: GREEN
Minimum Order:100 Sets
Price/Payment: US $10 - 30 / Piece
Production Capacity: 300,000 Sets per Month sets
Click here to send inquiry
High Quality Good Performance Ceramic Resistor Ignitor 150W-250W

Product Specifications/Features
    Type:Electrothermal Ceramics
    Material:Alumina
    Application:Pellet igniter for wood pellet burner
    Voltage:230V
    Reference Power:150-250W
    Resistance:40-200 ohm
    Dimension:L=94mm; D=17.5mm
    Silicone Cable:500 mm long


    1.Pellet gniter for wood pellets burners
    2.more than 1100deg.C
    3.Fast heating up
    4.Long life
    5.Meet Rohs

    HIGHLY DURABLE AND ENERGY-EFFICIENT XIAMEN GREEN WAY’S IGNITER

    ----ceramic hot surface igniters for the sake of environment.

    Xiamen Green Way is your best choice for high level quality and best price ceramic igniter for biomass burnerswith the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

    Characteristic

    1.High temperature-resistance ceramic heating element which can reach a permanent working temperature above 750°C

    2.Energy saving, super fast heating-up

    3.Air can through and around inside and outside of the heater.

    Heat can be transfered from both inside and ouside of the heating element.

    4.Electrically oxidation and corrosion-resistant

    5.High load-bearing capacity(thermal shock resistance, cycles)

    5.Customization the igniters according to customers’ specific requirement.

    Application

    One special application area for Green Way’s high temperature ceramic igniters is in heating systems that use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very short time while retaining very low emission values. This can be perfectly achieved by Green Way’s hot surface ceramic igniters.

    Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions!

    Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.

    1

    Part No.

     G78105-12

    2

    Usage

    ceramic igniter for Pellet burner

    3

    Working Voltage

    230VAC

    4

    Power

    150--250(W)

    5

    Dimension

    L=94mm; D=17.5mm (standard igniter)

    6

    Silicon Cable

    500mm long

    7

    Advantages

    (1)Ready assembled, easy-to-install systems.

     

    (2)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket

     

    (3)Space-saving, noiseless and impervious to overheating.

     

     (4)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C

     

     (5)Lifetime up to 100,000 heating cycles, depending on operating conditions

     

     (6)Minimal energy consumption

     

     (7)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower!

     

    (8)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible.

Click here to send inquiry
Didn't find what you're looking for? Post a Buy Offer
Send inquiry directly to this supplier
Cassie Luo
Ms. Cassie Luo
 
From: qdl@xmgrwy.com(Not you?)

Enter your inquiry details such as:

  • Self introduction
  • Required specifications
  • Inquire about price/ MOQ
View sample
  - Enter between 20 to 3,000 characters, English only.
   
More products from this companyFind More Products

Product Index

Company Profile