Surface treatment : hot dip galvanized
Zinc thickness: 86μm
Technology: press ,cut ,drop forged
Load : 70kn/120kn/160kn
Voltage : 11kv/33kv
Life time: more than 30years
Used on : overhead line
advantage: good price with high quality
Experience: More than 12years.
Used with: ball eye ,ball socket , tension clamp, U bolt
Export to : Allover the world
Certificate : ISO9001, SGS
electric power fitting Dimensions:
· The Zinc of the electric power fitting that shall be used shall have the quality of minimum category prime western according to the category Zn 98.5 according to ISO-1461.
· Then washed out with water and then flux treated and dried out.
· The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.
· The galvanization thickness of the electric power fitting shall be in average 80m thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μm and the average weight in relation to the galvanized area shall be 610 gr/m2.
- Packing: Banding
- Shipping: By sea
- Standard: Standard