130W Laser Power Supply (HY-HVCO2/2.0)
|Model Number: HY-HVCO2/2.0|
|Country of Origin: Shandong China (Mainland)|
|Brand Name: HongYuan|
|Minimum Order:5 Pieces a set of 5 pieces|
|Production Capacity: 3000 Pieces per Month sets|
130W Laser Power supply High output voltage and current
130W Laser Power supply
1. Main Features:
1) High output voltage and current: when inputting AC220V and outputting current up to 38MA, the voltage can be up to 25KV.
2) Response time: ≤1Msfrom the time that switch Signal is given to the output current up to 90% of the setting current
3) Increase the power of laser: Used with 2000mm laser, the peak of laser power can be up to 150W and the average power is 130W.
4) Dramatically lengthen the life of laser.
5) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc.
6) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power.
7) The power supply possesses open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
8) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
9) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power.
10) Application: thick acrylic cut, fabric cut, etc.
AC220V or AC110Vto be specified when placing order
Cold Surge Current
Maximum Input Voltage
Maximum Output Current
Mean Time Between Failure (MTBF)
≤1msfrom the switch Signal is given to the output current up to 90% of the setting current
TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification)
Input-Output, Input-Shell: AC1500V 10MA 60S; Output negative is connected with machine shell.
can work in open-circuit condition for a short timeRequire a good protective earthing and avoid arc between the positive and the machine shell
Operating Temperature-10~40,Relative Humidity (RH)≤90
Force-Air Cooling (FAC)
- Packing: The size of the carton packed one power is 41*28*16.5 (cm) .
- Shipping: According to clients' requirements and our stock situation.